What are the advantages of raised floor and how to

2022-07-22
  • Detail

There are many kinds of floors on the market. Have you heard of raised floors? Raised floor is a combination of plates and supports of various specifications and models. It is mainly divided into antistatic and non antistatic. At present, it is widely used in various computer rooms and broadcasting rooms. So what are the advantages of the raised floor and how to install it? Let's introduce it to you in this article

there are many kinds of floors in the market. Have you heard of raised floors? Raised floor is a combination of plates and supports of various specifications and models. It is mainly divided into antistatic and non antistatic. At present, it is widely used in various computer rooms and broadcasting rooms. So what are the advantages of the raised floor and how to install it? Let's introduce it to you in this article

what are the advantages of the raised floor

1. Fire and corrosion resistance

the raised floor has excellent fire and corrosion resistance, so the raised floor installed indoors has enough effective probability of avoiding fire

2. Light texture and high strength

the raised floor is relatively light in texture and excellent in strength. We can place heavy furniture on the floor. At the same time, the surface of the raised floor is very flat, so we don't have to worry about the uneven floor after paving

3. Protect wires

the raised floor adopts overhead design. We place wires, sockets and other products under the ground, which has quite good protection effect

how to install the raised floor

1. Clean the base course

before the installation of the raised floor, it is necessary to clean the base course of the ground first, so that the ground remains flat, clean and free of dust. At the same time, it is best to brush a layer of varnish on the ground

2. Measure the area of the room

after the base is cleaned, we need to measure the area of the room and find the focus of the center of the vertical and horizontal lines. If the room is a rectangular space, it is best to use a ruler to measure whether the adjacent wall is vertical. If it is not vertical, first make the wall vertical to avoid chess shaped plates on the wall during installation

3. Install the support and beam assembly

after determining the installation position, the Bureau needs to set the square mesh support and beam assembly on the base, and then use the level meter to level after all the supports and beams are integrated

4. Lay the surface course of the raised floor

after installing the support, you can start laying the surface course of the raised floor. When laying, you need to choose the laying direction of the plate according to the model of the floor

5. Cleaning and waxing

after the surface course of the raised floor is laid, we need to check the flatness of the floor. If everything is OK, we can wipe the panel clean and wax it

article summary: the above is about the advantages of raised floor and how to install it. I hope you can have a certain understanding of raised floor. If you have any questions about other related needs, please pay attention to Qijia information

郑州尖锐湿疣医院

郑州口腔医院

北京男科医院

Copyright © 2011 JIN SHI